- Guaranteed Secure Payments on Every Order
- Refund if your item is not delivered or as described
- Buyer Protection after order confirmation
- Size: 0.3
- Place of Origin: China
- Brand Name: kunlun
- Model Number: KL-MI-AP
- Weight: 65.000 kg
The Melt Flow Index Tester, Export Version Melt Flow Index Tester meets the demands : GB/T3682-2000, ISO1133-97, ASTM D1238,JIS K7210 and other standards involving main parameters.
• The Melt Flow Index Tester, Export Version Melt Flow Index Tester is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.
•It is widely used in plastic production, plastic products, petrochemical industries and related institutions, research institutes and inspection departments.
Advantages
a: High-precision color controller in English
b:Automatic cutting
c:Built-in mini printer to print the test data
d:Dual temperature control system
e:Increasing displacement sensor
f:Able to connect to a computer via USB, and to set test conditions by software on the computer, to print data and and store data.
Specification
emperature range:normal temperature-400℃
Temperature fluctuation:±0.2℃
Temperature uniformity:±0.5℃
Temperature display resolution:0.1℃
Time display resolution:0.1S
cylinder diameter:Φ2.095±0.005mm
The length of the discharge hole:8.000±0.025mm
Charging cylinder diameter:Φ9.550±0.025mm
Weight accuracy:±0.5%
Output mode: automatically printing via mini printer
Cutting mode:cutting by hand or automatically
Test load:total 8 grades,8 sets of weight
Power voltage:AC220V±10% 50HZ
- Size: 0.3
- Place of Origin: China
- Brand Name: kunlun
- Model Number: KL-MI-AP
- Weight: 65.000 kg
The Melt Flow Index Tester, Export Version Melt Flow Index Tester meets the demands : GB/T3682-2000, ISO1133-97, ASTM D1238,JIS K7210 and other standards involving main parameters.
• The Melt Flow Index Tester, Export Version Melt Flow Index Tester is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.
•It is widely used in plastic production, plastic products, petrochemical industries and related institutions, research institutes and inspection departments.
Advantages
a: High-precision color controller in English
b:Automatic cutting
c:Built-in mini printer to print the test data
d:Dual temperature control system
e:Increasing displacement sensor
f:Able to connect to a computer via USB, and to set test conditions by software on the computer, to print data and and store data.
Specification
emperature range:normal temperature-400℃
Temperature fluctuation:±0.2℃
Temperature uniformity:±0.5℃
Temperature display resolution:0.1℃
Time display resolution:0.1S
cylinder diameter:Φ2.095±0.005mm
The length of the discharge hole:8.000±0.025mm
Charging cylinder diameter:Φ9.550±0.025mm
Weight accuracy:±0.5%
Output mode: automatically printing via mini printer
Cutting mode:cutting by hand or automatically
Test load:total 8 grades,8 sets of weight
Power voltage:AC220V±10% 50HZ